Specifications

Specifications

Item

Model ESA30E-25
Power supply 3-phase 380V ±5%, 400V ±5%, 415V ±5% 50Hz
Operation to top up (In intermediate season) Heating capacity kW 30
Water amount Liter/min 8.97
Power consumption kW 6.98
COP 4.3
Operation to top up (In cold region) Heating capacity kW 30
Water amount Liter/min 5.06
Power consumption kW 10.73
COP 2.8
Operation sound dB(A) 58
Outside dimension Height mm 1,690
Width mm 1,350
Depth mm 720 + 35 (Water pipe connection)
Current Max A 21
Starting A 5
Unit weight kg 375 (During operation 385)
Colour Stucco white (4.2Y7.5/1.1 approx.)
Compressor Type x Pcs Hermetic inverter compressor x 1
Nominal output kW 6.4
Refrigerant Type R744 (CO2)
Charged amount kg 8.5
Refrigerant oil Type MA68
Charged volume cc 1200
Crankcase heater W 20
Anti-freezing heater for water pipe W 48 x 3
for drain pan W 40 x 2
for drain hose W 40 x 2 + 48
Heat exchanger, Air side Copper pipe straight fin type
Heat exchanger, Water side (Gas cooler) Copper pipe coil type
Fan Type Axial flow type (direct coupled motor) x 2
Output x Pcs W 386 x 2
Air volume m3/min 260
Water pump Type x output Non-self-suction spiral type inverter pump x 100W
Materials contacting to water Bronze, SCS13
Actual pump head m (kPa) 5m (49kPa) @17Liter/min
Usage temp range Outdoor air temp °C -25 to +43
Feed water inlet temp °C 5-63
Hot water outlet temp °C 60-90
Water pressure range kPa 500 or lower
Defrost Hot gas type
Vibration and sound proofing devices Compressor: placed on anti-vibration rubber and wrapped with sound insulation
Protection devices High pressure switch, over current protection, power transistor overheat protection and anomalous high pressure protection
Pipe size Feed water inlet Rc3/4 (Copper 20A)
Hot water outlet Rc3/4 (Copper 20A)
Drain water outlet Rc3/4 (Copper 20A)
Electric wiring Earth leakage breaker 30A, 30mA, 0.1 sec
Power cable size 14 x 4 (Length 40m)
Moulded-case circuit breaker Rated current: 30A, switch capacity: 30A
Grounding wire size M6
Remote controller wire size 0.3mm2 x 2 cores shielding wire (MVVS)
Design pressure MPa High pressure: 14.0, Low pressure: 8.5
IP code IP24
No products were found matching your selection.
X